Audi Q7 - ESC Off Functionality

38
If ESC is set to "o" using the TCS/ESPbutton E256, the various
functions of Audipresensewill be limited.
ESC o
If the vehicle is equipped with pre sense city and a further pre
sense function such as pre sense basic, the 3 displays are shown
one after the other. The messages are stored in the tab for driver
information and warning lamps and can be retrieved.
637_035 637_036
637_037
Note
The display for the driver information in Fig. 637_037 will probably change in the instrument cluster at a later point in time.
637_019
TCS/ESP button
E256
Stability Control (ESC):
swiitched o.
Warning!
Restricted
stability
Audi pre sense:
currently restricted
Emergency braking system
switched o
1st display 2nd display
3rd display
If the ESC is set to "o" mode with presensebasic, presenserear
or presensefront, the first 2displays appear in the instrument
cluster for about 5seconds. If the vehicle is only equipped with pre
sense city, the 1st and 3rd displays appear.
Operating unit 1 for drive and comfort/convenience functions
E791
< Back
Forwards >
Ξ Contents