Audi Q8 e-tron 2024 - Page 100

Driving
charge level of the high-voltage battery and the
temperature of the drive system components,
among other things.
The driving wheels could spin and the vehicle
could swerve on slick or slippery road surfaces
when using kick-down, which increases the
risk of an accident.
Launch Control
Applies to: vehicles with Launch Control
Launch Control provides the best possible accel-
eration when starting from a stop.
Requirements
— Driving program “S” page 97 or the dynamic
Audi drive select* mode must be selected
© page 107.
~The boost function is available > page 97.
Using Launch Control
— Press the brake pedal with your left foot and
hold it all the way down for at least one second.
—With the brake pedal pressed, press the accel-
erator pedal all the way down with your right
foot at the same time.
— Once the display in the power meter actively
flashes, remove your foot from the brake pedal.
Only use Launch Control when road and traffic
conditions allow it and other road users will
not be endangered or impacted by your driv-
ing and the vehicle's acceleration. The driving
wheels could spin and the vehicle could
swerve, especially on slick or slippery road
surfaces, which increases the risk of an acci-
dent.
When accelerating using Launch Control, all
vehicle components are subject to heavy
loads. This can result in increased wear.
98
After accelerating using the Launch Control,
the temperature of some vehicle components
may increase greatly. If that happens, the
function will not be available for a few mi-
nutes to reduce the risk of damage. After a
cool-down period, Launch Control will be
available again.
Messages
The following messages may appear depending
on the vehicle equipment:
ii transmission: malfunction! Safely stop vehi-
cle
Do not continue driving. Stop the vehicle as soon
as possible in a safe location and secure it so it
does not roll > page 95. See an authorized Audi
dealer or authorized Audi Service Facility for as-
sistance.
[Bl selector lever: malfunction! Gear change on-
ly possible if using both shift paddles.
There is a system malfunction in the selector lev-
er. You can continue driving with restricted func-
tion. The selector lever is not working. Gears can
only be selected by tapping both shift paddles at
the same time when the vehicle is stationary. The
“P” gear is automatically engaged when you
switch off the drive system. Drive to an author-
ized Audi dealer or authorized Audi Service Facili-
ty immediately to have the malfunction correct-
ed.
[BP button: malfunction! Auto P when engine
off. Please contact Service
There is a malfunction in the "P" button on the
selector lever. The “P” gear is automatically en-
gaged when you switch off the drive system.
Drive to an authorized Audi dealer or authorized
Audi Service Facility immediately to have the
malfunction corrected.
FB) Danger of rolling away! P not possible.
Please apply parking brake
The parking lock can no longer be engaged. Drive
to an authorized Audi dealer or authorized Audi
>
OwnersManuals2.com