Audi Q8 e-tron 2024 - Child Safety Lock; Power Windows

4K40127218A
Opening and closing
Child safety lock
The child safety lock prevents the rear doors
from being opened from the inside and the rear
power windows from being operated.
Fig. 33 Driver's door: controls
» To activate or deactivate the child safety lock
for the rear doors (which controls the power
windows and interior door handle), press the
left and/or right 8 button in the driver's door
© fig. 33. The LED in the button will turn on or
off.
» Make sure the child safety lock is working by
checking the function on the rear power win-
dow switch and door handle.
> Applies to: vehicles with controls for the cli-
mate control system in the rear and MMI: To al-
so restrict the operation of the climate control
system in the rear, select on the home screen:
SETTINGS > Display & brightness > Operation
inrear
When the child safety lock is switched on, the
following functions are disabled:
~The rear inner door handles
~The rear power windows
- The control panel* for the climate control sys-
tem in the rear
Message in the instrument cluster display
The following messages may appear depending
on the vehicle equipment:
@®/ Child safety lock: malfunction! Please
contact Service
There is a malfunction in the child safety lock.
Press the @ button again.
If the message stays on, drive immediately to an
authorized Audi dealer or authorized Audi Service
Facility to have the malfunction repaired.
— Observe the safety precautions > page 36.
—Amalfunction in the child safety lock could
allow
the rear doors to be opened from the
inside, which increases the risk of an acci-
dent.
Power windows
Opening and closing the windows
[raz-i63)
+e)
@ fale ®
Fig. 34 Driver's door: power window switch
Power window switches:
@ Left front door
@ Right front door
@ Left rear door
@ Right rear door
Opening and closing the windows
The driver can control all power windows. All
power window switches are equipped with a two-
stage function:
» To open or close the window completely, press
the switch down or pull the switch up briefly to
the second level. The operation will stop if the
switch is pressed or pulled again.
» To select a position in between opened and
closed, press or pull the switch to the first level
until
the desired window position is reached.
Correcting a malfunction in the one-touch
up/down function
If necessary, you can reactivate the one-touch up/
down function if it malfunctions. >
47
OwnersManuals2.com