Audi Q8 e-tron 2024 - Adjusting the Display; Power Meter

Instrument cluster
Information is organized within various tabs @) in
the instrument cluster. The tab contents are
displayed in the central area @).
Requirement: the ignition must be switched on.
Selecting a tab
> Press the </> button @ repeatedly until the
desired tab is selected.
Returning to functions at higher levels
> Press the > button ©).
Opening and closing the menu
> Press the I button ©.
Selecting and confirming a function
Requirement: a menu or list must be displayed.
» To select a function, turn the left thumbwheel
@ to the desired function.
» To confirm a selection, press the left thumb-
wheel @.
Switching the view
» Press the VIEW button @).
The following tabs may be available, depending
on vehicle equipment:
Firsttab __| Vehicle functions = page 17
Second tab | Driver messages (this is only dis-
played if at least one indicator
light/message is being displayed)
Thirdtab | Radio ® page 229
Media © page 239
Fourth tab Telephone page 207
Fifth tab | Navigation © page 216
Adjusting the display
Fig. 6 Upper display: adjusting the display
16
Switching the view
> Press the VIEW button to switch between the
default view @ and the enhanced view @).
Adjusting the layout
Depending on the vehicle equipment, various lay-
outs may be available.
» Applies to: MMI: Select on the home screen:
SETTINGS > Display & brightness > Audi virtu-
al cockpit.
» To adjust the desired layout, press @).
Adjusting the additional display
Depending on the vehicle equipment, the addi-
tional displays that can be selected may vary.
» Applies to: MMI: Select on the home screen:
SETTINGS > Display & brightness > Audi virtu-
al cockpit > Configure.
» Select the desired additional display.
Reducing the display
Depending on the vehicle equipment, you can
hide the central area in the instrument cluster.
» Select on the instrument cluster: vehicle func-
tions tab > I button > Reduced display.
Power meter
Fig. 7 Instrument cluster: power meter
The power meter @) page 15 gives feedback
about the usage capacity of the drive system. The
power meter needle displays the current usage
capacity. A colored border indicates how much
the drive system can currently be utilized. The
colored border may vary depending on the select-
ed driving program and the electric power cur-
rently available.
OwnersManuals2.com