Audi Q8 e-tron 2024 - Odometer; Vehicle Functions

4K4012721BA
Instrument cluster
Depending on the vehicle equipment, the power
meter displays the following driving statuses:
@ Drive system switched off
® Vehicle recovering electrical energy
©® Drive system switched on
@ Vehicle is being driven, drive sys-
tem usage information in percent-
age
© Vehicle is being driven briefly with
maximum power
Odometer
The trip odometer and odometer are displayed in
the status bar @ > page 15.
The trip odometer shows the distance driven
since it was last reset. It can be used to measure
short distances. The odometer shows the total
distance that the vehicle has been driven.
Resetting the trip odometer
» Select on the instrument cluster: vehicle func-
tions tab > ©) button > Reset mi.
Distances are displayed in mi (miles) or km
(kilometers).
Outside temperature
display
The outside temperature is displayed in the sta-
tus bar @ page 15.
At temperatures below 41 °F (+5 °C), a snowflake
symbol appears in front of the temperature dis-
play A.
Do not assume the roads are free of ice based
on the outside temperature display. Be aware
that there may be ice on roads even when the
outside temperature is around 41 °F (+5 °C)
and that ice can increase the risk of accidents.
Vehicle functions
Overview
The trip computer is displayed in the first tab of
the driver information system. Additional vehicle
functions can be accessed depending on the vehi-
cle equipment.
» Press the &) button on the multifunction steer-
ing wheel.
—Trip computer © page 17
= Charging ® page 117.
— Reduced display * page 16
— Reset trip odometer @ page 17
— Lap times @ page 147
— Lap statistics ® page 148
On-board computer
Changing the display
» Turn the left thumbwheel on the multifunction
steering wheel @ > page 15, fig. 5 until the
desired display is shown.
Resetting values to zero
Requirement: the Consumption, Short-term
memory, or Long-term memory display must be
selected.
> To reset the values in one of the memories to
zero, press and hold the left thumbwheel on
the multifunction steering wheel for one sec-
ond, or
» Select on the instrument cluster: vehicle func-
tions tab > [=] button > Reset mi.
Displays in the trip computer
The following displays may be shown, depending
on the vehicle equipment:
~Time and date ® page 249
— Range display > page 99
— Average consumption > page 18
~ Short-term memory overview
— Long-term memory overview
— Driver assistance page 154
~ Traffic sign recognition and traffic light infor-
mation
17
OwnersManuals2.com