Audi Q8 e-tron 2024 - Page 133

4K4012721BA
High-voltage system
oO Off
@ C Red
@ & Red
@ 0 Red
iS) Red
The
indicator light in the
On/Off button on the control
unit is faulty. The charging
process has been interrupted.
Have the control unit replaced by an au-
thorized Audi dealer or authorized Audi
Service Facility.
Technical Data
The output of the charging system may be differ-
ent from the charging rate of your vehicle. Cer-
tain factors, such as fluctuations in the system
voltage, may also influence the output of the
charging system © page 115.
61439-1)
Max. output 9.6 kW
Current rating 40 A single phase
System voltage 120V-240V
Power frequency 50 Hz/60 Hz
Overvoltage category (IEC 60664) II
Short-time current rating (EN <10 kA eff.
Power plug versions NEMA 6-30; NEMA 6-50; NEMA 14-30; NEMA 14-50; NEMA
5-15
Integrated residual-current device AC: 20 mA; DC: 56 mA
Vehicle charging connector Type 1
Protection class
IP Code 55 (USA: Enclosure 3)
Control unit mass 5.3 lbs - 7.7 lbs (2.4 - 3.5 kg)
Control unit dimensions (height x
width x depth)
12.2 inx 4.1 in x 2.8 in (310 mm x 105 mm x 72 mm)
~The device runs a self test after power has
—The system complies with United States FCC
regulations and ISED regulations
= page 319.
been restored to the control unit. If a self
test is successful, all indicator lights will il-
luminate green for two seconds.
Changing or attaching the cable
Applies to: vehicles with Audi charging system
~The Audi e-tron Charging System Compact is
designed for charging at sockets with a volt-
age of 120 V/240 V. If your socket has a dif-
ferent voltage, contact and authorized Audi
dealer or authorized Audi Service Facility.
~ If your Audi e-tron Charging System Com-
pact has a fixed connection, meaning it can
be connected directly to the power supply
without a power cable, contact a qualified
electrician or an authorized Audi dealer or
authorized Audi Service Facility.
(car
OL@
Fig. 92 Control unit: removing and attaching the cable
131
>
OwnersManuals2.com