Audi Q8 e-tron 2024 - Page 25

4K4012721BA
Touch displays
Description of common symbols
You can operate the default functions using the
symbols that follow. The symbols may be found
in any menu, depending on the context.
‘Symbol Description
Go back one level
Close the menu
Search for content
Open explanations for a menu
Open settings for the selected
menu
Open the submenu
Adjust the settings
Set as favorite
O Switch functions on or off
‘Switch functions on or off
e7{OREE Switch functions on or off
Open additional actions
Open additional information for
the selected menu
Overview screen
The overview screen is the first menu page in the
MMI. Information about certain vehicle functions
such as media, time, and phone is displayed in
tiles. The available information tiles can be rear-
ranged on the overview screen or replaced with
others. Depending on the system context, you
may be able to operate certain functions directly,
such as muting the sound.
Switching between the overview screen and
the home screen
» Press © repeatedly until the desired view ap-
pears.
Configuring the overview screen
» Press and hold an information tile on the over-
view screen.
» To change the position of an information tile,
press and hold it and then slide it to the desired
position.
» To replace an information tile, press Z and se-
lect the desired information tile.
> Press Done to complete the configuration.
With quick access, you can return to the home
screen and quickly switch between four menus
that can be configured according to your prefer-
ences.
Returning to the home screen or opening a
menu quickly
» Press ©) or one of the four buttons.
Configuring quick access
» Press and hold a button on the home screen
display area or in the quick access bar.
» To move a button to the quick access bar, pull it
from the display area to the quick access bar.
» To adjust the placement of the buttons in the
quick access bar, pull them to the desired posi-
tion in the bar.
» Press Done to complete the configuration.
@ Tips
The position of Q) cannot be adjusted.
You can freely change the location of the buttons
on the home screen display area.
Configuring the display area
» Press and hold a button on the home screen
display area.
» To adjust the placement of the buttons, pull
them to the desired locations.
» Press Done to complete the configuration.
Switching between menu pages
Ifa menu contains multiple menu pages,
displayed in the display area. The white bar
shows the location of the current menu page.
» To switch between menu pages, swipe your fin-
ger to the right or left.
23
OwnersManuals2.com