50
Engine fuel filter replacing process:
The engine fuel filter is placed inside the fuel cell fixed to a bracket by a tie-wrap, the fuel pipes are connected
by fast couplings.
1. Drain out the fuel tank completely.
2. Open the right cover of the fuel tank.
3. Remove the fuel pump and the reservoir as explained above.
4. Cut the tie-wrap, disconnect the fuel pipes and take out the fuel filter.
5. Fix the new filter on the bracket, reconnect the fuel pipes, assemble the reservoir and close the fuel
tank again.
Airjacks
The Audi RS 3 LMS is provided with a three ā 50mm Krontec airjack system. The connecting valve is placed
on the rear right side, inside the road car refuelling cover.
Airlance and car plug dismounted view:
To Next Page
Loading...
