To Next PageTo Next Page
Need help?Do you have a question about the Audio Technica AT-LP60XBT-USB and is the answer not in the manual?
General| Platter | Aluminum |
|---|---|
| Cartridge | AT3600L |
| Outputs | RCA, Bluetooth |
| Bluetooth Version | 5.0 |
| Bluetooth Codecs | SBC |
| USB | Yes |
| Phono Pre-Amp Gain | 36 dB |
| Power Supply | AC adapter |
| Replacement Stylus | ATN3600L |
| Type | Belt drive |
| Speeds | 33-1/3 RPM, 45 RPM |
| Motor | DC motor |
| Phono Preamp | Built-in |
| Wow and Flutter | <0.25% WRMS |
| Signal-to-Noise Ratio | >50 dB |
| Output Level | 150 mV (line) |
| Weight | 2.6 kg (5.7 lbs.) |
Access to the full user manual and official website for further product information and support.
Guide to preparing the turntable for use, including belt and platter installation.
Instructions on how to connect the turntable's audio output to an amplifier or speaker system.
Steps for wirelessly connecting the turntable to Bluetooth-enabled devices for audio playback.
Instructions for starting and stopping playback automatically using the start/stop buttons.
Steps for manually placing the tonearm and starting/stopping record playback.
Guidelines for cleaning the turntable and stylus to ensure optimal performance and longevity.
