To Next PageTo Next Page
Need help?Do you have a question about the Audio Technica AT-LP60BK-BT and is the answer not in the manual?
General| Drive Method | Belt Drive |
|---|---|
| Speeds | 33-1/3, 45 RPM |
| Motor | DC Servo Motor |
| Turntable Platter | Aluminum |
| Cartridge | AT3600L |
| Bluetooth | Yes |
| Type | Belt-drive |
| Outputs | RCA |
| Wow and Flutter | <0.25% |
| Signal-to-Noise Ratio | 50 dB |
| Output Level | Phono: 2.5 mV nominal at 1 kHz, 5 cm/sec; Line: 150 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain | 36 dB nominal |
| Power Supply | AC adapter |
Overview of the AT-LP60-BT wireless turntable, its features, and benefits.
Covers essential warnings, cautions, references, and environmental considerations for safe operation.
Guidance on potential radio frequency interference with Bluetooth and other wireless devices.
Step-by-step procedure for assembling the AT-LP60-BT turntable.
Instructions for configuring the PHONO/LINE switch based on audio system input.
Steps to pair the turntable with Bluetooth receiver devices.
Detailed steps for initial pairing and establishing a wireless connection.
How to play music after establishing a Bluetooth connection.
Explanation of the LED indicator patterns for wireless status.
Solutions for problems like the turntable not operating or starting.
Resolving issues of no sound, low volume, or distorted audio playback.
Addressing minor up and down movement of the tone arm during operation.
Recommendations for maintaining and maximizing the turntable's performance.
