Need help?Do you have a question about the Audio Technica AT-LP60X and is the answer not in the manual?
General| Type | Fully Automatic Belt-Drive Turntable |
|---|---|
| Drive Method | Belt Drive |
| Speeds | 33-1/3 RPM, 45 RPM |
| Turntable Platter | Aluminum |
| Phono Pre-Amp | Built-in switchable phono pre-amplifier |
| Output | RCA |
| Motor | DC servo-controlled |
| Phono Pre-Amp Gain | 36 dB nominal, RIAA equalized |
| Cartridge | ATN3600L |
| Replacement Stylus | ATN3600L |
| Weight | 2.6 kg |
| Wow and Flutter | < 0.25% (WTD) @ 3 kHz |
| Signal-to-Noise Ratio | 50 dB |
| Output Level | Pre-amp 'PHONO': 2.5 mV nominal at 1 kHz, 5 cm/sec; Pre-amp 'LINE': 150 mV nominal at 1 kHz, 5 cm/sec |
| Stylus | 0.6 mil Conical Diamond Stylus |
| Dimensions | 359.5 mm x 97.5 mm x 373.3 mm |
Lists all items included in the product packaging for user verification.
Contains critical warnings and cautions for safe operation and preventing hazards.
Provides specific regulatory information for Canadian users.
Details FCC compliance and warnings for US users.
Guides on mounting the turntable on a level surface and avoiding interference.
Instructions for attaching and detaching the dust cover.
Steps for initial assembly of the turntable before first use.
Instructions on how to rotate the platter for initial setup and belt alignment.
Details on connecting the power adapter to the outlet.
Explains how to set the pre-amplifier switch based on audio equipment.
Steps to prepare the turntable and record before starting playback.
Guides on selecting speed, size, and starting playback automatically.
Steps for manually lifting and positioning the tonearm for playback.
Instructions on how to temporarily lift the tonearm to pause playback.
Procedures for manually stopping playback and removing the record.
How to clean the exterior of the turntable body.
Guidelines for cleaning the stylus tip to maintain sound quality.
Steps and precautions for safely removing the stylus from the cartridge.
Instructions for mounting and securing a new stylus onto the cartridge.
Solutions for issues where the turntable platter fails to rotate.
Troubleshooting steps for missing audio output or insufficient volume.
Diagnosing and fixing problems with the stylus jumping during playback.
Addressing issues that cause howling or feedback noises.
Identifying sources of unwanted noise during record playback.
Resolving issues with playback speed being too fast or too slow.
Solutions for playback speed degradation or inconsistent rotation.
To Next Page
