To Next PageTo Next Page
Need help?Do you have a question about the Audio Technica AT-LP3 and is the answer not in the manual?
General| Type | Belt-drive audio turntable |
|---|---|
| Operation | Fully automatic |
| Motor type | DC motor |
| Output level | 220 mV |
| Product color | White |
| Wow & flutter | 0.2 % |
| Output voltage | 3.5 mV |
| Platter material | Aluminum |
| Turntable speeds | 33 1/3, 45 RPM |
| Signal-to-Noise Ratio (SNR) | 60 dB |
| Overhang | 19 mm |
| Tonearm type | Statically balanced tonearm |
| Tracking angle | 3 ° |
| Tracking force range | 1.5 - 2.5 g |
| USB ports quantity | 0 |
| Quantity | 1 |
| Counterweight | Yes |
| Cables included | AC |
| AC adapter frequency | 50/60 Hz |
| AC adapter input voltage | 220 - 240 V |
| Power consumption (typical) | 2 W |
| Package depth | 480 mm |
| Package width | 520 mm |
| Package weight | 6900 g |
Weight and Dimensions| Depth | 353 mm |
|---|---|
| Width | 435 mm |
| Height | 128 mm |
| Weight | 5200 g |
Introduction to the Audio-Technica AT-LP3 fully automatic belt-drive turntable.
Lists all accessories and components included with the AT-LP3 turntable.
Critical safety information to prevent hazards like fire, electric shock, and damage.
Specific safety instructions for users in the USA and Canada.
FCC and IC statements regarding device operation and interference.
Guidelines for placing the turntable in a suitable environment to prevent damage or malfunction.
Recommendations for handling the cartridge and stylus to avoid damage and ensure sound quality.
Visual guide identifying all main parts of the AT-LP3 turntable with numbered labels.
Detailed description of the tonearm's parts and their specific functions.
Instructions on how to correctly position and install the turntable on a level surface.
Steps for placing the platter and rubber mat onto the turntable spindle.
Guide on how to correctly attach the headshell to the tonearm.
Procedure for balancing the tonearm and setting tracking force.
Instructions for adjusting the tracking force using the counterweight and gauge.
How to set the anti-skate control to match the tracking force.
Guide to setting the MM/MC cartridge and pre-amplifier output selector switches.
How to connect the RCA audio cable to amplifiers or receivers.
Steps to rotate the platter ten times to prepare the drive mechanism.
Instructions for connecting the turntable to a power source.
Steps to take before placing a record on the turntable.
How to use the automatic start, speed, and size selection for playback.
Guide for manually placing the tonearm on the record.
How to pause the record playback and lift the tonearm.
Procedures for stopping playback and safely removing the record.
Instructions for cleaning the exterior of the turntable.
Guide on how to clean the stylus tip to maintain sound quality.
Detailed steps for removing and installing a new cartridge.
Instructions for replacing the turntable's drive belt for proper speed.
Guide for adjusting the cartridge overhang for optimal playback.
Precautions and steps for packing and moving the turntable.
Solutions for issues like the platter not spinning or low/no sound output.
Troubleshooting steps for stylus skipping, record noise, and speed variations.
Solutions for hum during playback, incorrect speed, and other operational problems.
Detailed technical data for the turntable and tonearm components.
Technical data for the cartridge, headshell, power, and dimensions.
Information on the warranty coverage for Audio-Technica products purchased in the USA.
