Audio Technica AT-LP3 User Manual

5
Part names and functions
Tonearm
1
2
3
5
6
8
4
9
7
1
Counterweight
Balances the tonearm and adjusts to provide the proper tracking force.
2
Tracking force gauge ring
Use to adjust the tracking force.
3
Tonearm lift
Moves the tonearm vertically to and from the face of the record.
4
Tonearm rest
5
Anti-skate control dial
While the record is playing, a force acts on the stylus tip to pull it inward.
This force can be counteracted by setting the same values for anti-skate
and the tracking force.
6
Tonearm lift control lever
Operates the tonearm lift.
7
Tonearm
8
Locking ring
Rotate the ring to the left (counterclockwise) to secure the headshell. To
remove the headshell, rotate the ring to the right.
9
Headshell and cartridge
The cartridge (AT91R) is mounted to the headshell (AT-HS3).
AT-LP3_UM_V2_ATUS_book.indb 5 2016/11/29 11:17

Audio Technica AT-LP3 Specifications

General

Type	Belt-drive audio turntable
Operation	Fully automatic
Motor type	DC motor
Output level	220 mV
Product color	White
Wow & flutter	0.2 %
Output voltage	3.5 mV
Platter material	Aluminum
Turntable speeds	33 1/3, 45 RPM
Signal-to-Noise Ratio (SNR)	60 dB
Overhang	19 mm
Tonearm type	Statically balanced tonearm
Tracking angle	3 °
Tracking force range	1.5 - 2.5 g
USB ports quantity	0
Quantity	1
Counterweight	Yes
Cables included	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	220 - 240 V
Power consumption (typical)	2 W
Package depth	480 mm
Package width	520 mm
Package weight	6900 g

Weight and Dimensions

Depth	353 mm
Width	435 mm
Height	128 mm
Weight	5200 g