Need help?Do you have a question about the Audio Technica AT-LPW50PB and is the answer not in the manual?
Turntable Specifications| type | Belt-drive manual turntable |
|---|---|
| motor | DC servo with Active Speed Stabilization |
| drive method | Belt drive |
| speeds | 33-1/3 RPM, 45 RPM |
| turntable platter | Aluminum Die Casting |
Tonearm Specifications| type | Static balanced straight carbon tonearm |
|---|---|
| effective length | 223.6 mm |
| overhang | 18.6 mm |
| maximum tracking error angle | Less than 2.0° |
| stylus pressure adjustment | 0 to 3.0 g range |
Cartridge and Headshell Specifications| cartridge model | AT-VM95E BK |
|---|---|
| cartridge type | VM |
| recommended load | 47, 000 ohms impedance |
| output voltage | 4.0 mV |
| tracking force range | 1.8 to 2.2 g |
General Specifications| power supply requirements | 100 to 240 V, 50/60 Hz, 0.5 A Max. |
|---|---|
| power consumption | 1.3 W |
| ac adapter | 12 V, 0.5 A |
| dimensions | 420 mm × 340 mm × 126 mm |
| weight | 5.56 kg |
General safety warnings and cautions for product usage and environment.
Step-by-step guide for attaching the headshell and counterweight.
Crucial steps for balancing the tonearm and setting tracking force.
Procedures for adjusting tracking force and anti-skate.
Step-by-step guide on how to play a record.
Comprehensive guide for replacing the cartridge and re-adjusting settings.
Guide to accurately positioning the cartridge for optimal playback.
Solutions for when the turntable platter fails to rotate.
Troubleshooting steps for audio output problems.
Diagnosing and fixing problems with the stylus skipping.
Resolving issues related to howling and surface noise.
To Next Page
