9
Using the product
The product can use
Bluetooth
wireless technology to connect to your device and play music, receive phone calls,
etc. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee
compatible operation with connected
Bluetooth
devices.
Power supply
Power supply Switch operation Indicator lamp
ON
*1
Lights in red and blue simultaneously
(appears purple), then flashes in red
and blue*
2
OFF
*1
Lights in red and blue simultaneously
(appears purple), then turns off
*1 If you are wearing the product, you will hear a beep to indicate when the product has turned on and off.
*2 It may take several seconds for the indicator lamp to light.
Wearing the product
Place the product with the side marked “L” over your left ear and the side marked “R” over
your right ear, and adjust the headband length by sliding the adjustable slider so that the
earpads cover your ears completely.
Folding compactly
Using the joint as a fulcrum, the housing can be folded into the headband.
• When folding the product, detach the included cable.
• Be careful not to pinch your fingers, etc. in the joint.
• Be sure to return the housing to its original position before using the product.
Joints
Fold
Unfold
?RF+QP4@R]SK]T0]/.J]`mmi,glb`7 0./5-.0-/4/1810
To Next Page
Loading...
Need help?
General
