Need help?Do you have a question about the AudioCodes M500Li and is the answer not in the manual?
General| Model | M500Li |
|---|---|
| Ports | 4x Gigabit Ethernet |
| Power over Ethernet (PoE) | No |
| Wireless | No |
| Protocols | SIP, RTP, RTCP, HTTP, HTTPS, TFTP, SSH |
| Voice Codecs | G.711, G.722, G.726, G.729, iLBC |
| Fax Support | T.38 |
| Management | SNMP |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
Explains how to initially access the device and change its default IP address.
Details the process of initially accessing the device's management interface.
Describes how to configure the device's LAN and WAN interfaces.
How to enable remote web-based management (HTTP/S) access from the WAN.
Describes the WAN interface configuration for the Voice Gateway.
How to configure the Proxy Server Address (IP or Hostname).
Steps to configure FXS ports, also known as Trunk Groups.
Details on how to configure specific Trunk Group settings.
How to configure authentication for FXS ports.
Steps for configuring IP to Telephone routing rules.
How to configure proxy settings and registration parameters.
To Next Page
