AudioCodes M500Li - Voice Gateway using Proxy Server; WAN Interface Configuration

2. Voice Gateway using Proxy Server
M500Li Analog VoIP Gateway
- 8 -
2 Voice Gateway using Proxy Server
This example scenario describes how to route calls when the Voice Gateway configured to
work using a Proxy Server and FXS ports (Basic configuration).
Figure 2-1: Example of Voice Gateway using SIP Proxy and FXS Ports
2.1 WAN Interface Configuration
This section describes the WAN Interface configuration of the Voice Gateway.
To configure WAN IP address:
◼ Open the WAN Interface page (Setup menu > IP NETWORK tab > CORE ENTITIES folder >
WAN Interface).