AudioCodes Mediant 1000 Fast Track Guide

Mediant 1000 Digital
Fast Track Guide 16 Document #: LTRT-63802
3.4 Configuring the Mediant 1000 Basic Control Protocol
Parameters
To configure the Mediant 1000 basic control protocol parameters use the Embedded Web
Server’s ‘Quick Setup’ screen.
NOTE THE FOLLOWING SEPARATION IN THIS GUIDE
 For MGCP / MEGACO, refer to Section 3.4.1 on page 17.
 For H.323, refer to Section 3.4.2 on page 19.
 For SIP, refer to Section 3.4.3 on page 21.
When you have completed the above relevant section you are then ready to start using the
Mediant 1000. For information on how to fully configure the VoIP gateway, refer to the digital
Mediant 1000
User’s Manuals.
Tip: Once the gateway is configured correctly back up your settings by making a
copy of the VoIP gateway configuration (ini file) and store it in a directory on your
PC. This saved file can be used to restore configuration settings at a future time.
For information on backing up and restoring the gateway’s configuration refer to
Section 5 on page 27.
Note: The following configuring Sections from here up to and including Section 3.4.3
on page 21 apply individually to MGCP/MEGACO, H.323, or SIP.
MGCP/MEGACO configuring continues with Section 3.4.1 on page 17.
H.323 configuring continues with Section 3.4.2 on page 19.
SIP configuring continues with Section 3.4.3 on page 21.

AudioCodes Mediant 1000 Specifications

General

Data link protocols	CAS: MF-R1: T1 CAS, ISDN PRI: ETSI/EURO ISDN, ANSI NI2, QSIG
Security algorithms	HTTPS, SRTP
Authentication method	RADIUS
Internal memory	512 MB
Built-in processor	Celeron 600 MHz
Processor frequency	600 MHz
Internal memory type	-
Number of processors installed	1
Voice codecs	G.711, G.723.1, G.726, G.729A, iLBC
Safety	UL60950-1, FCC 47 CFR
Certification	ETS 300019-2-1, ETS 300019-2-2 ETS 300019-2-3
Mounting type	Rack mounting
LED indicators	Yes
Power requirements	90-260 V AC

Weight and Dimensions

Size (imperial)	19 \