AudioCodes Mediant 800 - Quick Setup Guide Manual

1 | Page
Mediant™ 800 Gateway and E-SBC
Quick Setup Guide
Welcome
Congratulations on purchasing your AudioCodes Mediant 800 Gateway and Enterprise Session Border
Controller (E-SBC), hereafter, referred to as the device! This Quick Guide applies to hardware revisions B and C.
This document is intended to provide basic setup instructions for initial access to the device and for connecting
it to your network. For advanced configuration and cabling, refer to the User's Manual and Hardware Manual
respectively, which can be downloaded from AudioCodes website at
https://www.audiocodes.com/library/technical-documents.
Before you begin, please read the Safety Precautions on page 9.
Package Contents
Make sure that the following items (in addition to any separate-orderable items that you may have purchased)
are shipped with your device:
 4 x anti-slide bumpers for desktop mounting
 2 x mounting brackets for 19-inch rack mounting
 1 x AC power cable
 1 x AC/DC power adaptor (supplied only when DC power is ordered, which is applicable only to Rev. C)
 Regulatory Information document