EasyManuals Logo
Home>AudioCodes>Gateway>MediaPack MP-102

AudioCodes MediaPack MP-102 User Manual

AudioCodes MediaPack MP-102
238 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #183 background imageLoading...
Page #183 background image
MP-1xx SIP User’s Manual 11. SNMP-Based Management
Version 4.4 183 March 2005
acBoard MIB - This proprietary MIB contains objects related to configuration of the device
and channels, as well as to run-time information. Through this MIB, users can set up the
device configuration parameters, reset the device, monitor the device’s operational
robustness and Quality of Service during run-time, and receive traps.
Note: The acBoard MIB is still supported but is being replaced by five newer
proprietary MIBs.
The acBoard MIB has the following groups:
boardConfiguration
boardInformation
channelConfiguration
channelStatus
reset
acTrap
As noted above, five new MIBs cover the device’s general parameters. Each contains a
Configuration subtree for configuring related parameters. In some, there also are Status and
Action subtrees.
The 5 MIBs are:
1. AC-ANALOG-MIB
2. AC-CONTROL-MIB
3. AC-MEDIA-MIB
4. AC-PSTN-MIB
5. AC-SYSTEM-MIB
Other proprietary MIBs are:
acGateway MIB - This proprietary MIB contains objects related to configuration of the device
when applied as a SIP or H.323 media gateway only. This MIB complements the other
proprietary MIBs.
The acGateway MIB has the following groups:
Common - for parameters common to both SIP and H.323
SIP - for SIP parameters only
H.323 - for H.323 parameters only
acAlarm - This is a proprietary carrier-grade alarm MIB. It is a simpler implementation of the
notificationLogMIB and the IETF suggested alarmMIB (both also supported in all MP-1xx and
related devices).
The acAlarm MIB has the following groups:
ActiveAlarm - straightforward (single-indexed) table, listing all currently active alarms,
together with their bindings (the alarm bindings are defined in acAlarm. acAlarmVarbinds
and also in acBoard.acTrap. acBoardTrapDefinitions.
oid_1_3_6_1_4_1_5003_9_10_1_21_2_0).
acAlarmHistory - straightforward (single-indexed) table, listing all recently raised alarms
together with their bindings (the alarm bindings are defined in acAlarm. acAlarmVarbinds
and also in acBoard.acTrap. acBoardTrapDefinitions.
oid_1_3_6_1_4_1_5003_9_10_1_21_2_0).

Table of Contents

Other manuals for AudioCodes MediaPack MP-102

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack MP-102 and is the answer not in the manual?

AudioCodes MediaPack MP-102 Specifications

General IconGeneral
BrandAudioCodes
ModelMediaPack MP-102
CategoryGateway
LanguageEnglish

Related product manuals