AudioCodes MediaPack MP-11x Series - 2 Unpacking the MP-11 X

Analog Gateways 11 MP-11x
Hardware Installation Manual 2. Unpacking the MP-11x
2 Unpacking the MP-11x
Follow the procedure below for unpacking the carton in which MP-11x is shipped.
 To unpack MP-11x:
1. Open the carton and remove the packing materials.
2. Remove the MP-11x unit from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the MP-11x unit, the package contains the following items:
• AC power cable.
• Small plastic bag containing four anti-slide bumpers for desktop installation.
• Regulatory Information document.
5. Check, retain, and process any documents.
6. Notify AudioCodes or your local supplier of any damage or discrepancies.