Name: AudioCodes MP-112
Brand: AudioCodes
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Analog Gateways 19 MP-11x

Hardware Installation Manual 4. Mounting MP-11x

2. Insert a wall anchor of the appropriate size into each hole.

3. Fasten a DIN 96 3.5 x 20 wood screws (not supplied) into each of the wall anchors.

Make sure that the heads extend sufficiently (about 3/16 inch or 5 mm) from the wall

for the device's keyholes to hang on:

Figure 4-3: Protruded Screw Distance from Wall Surface

4. Mount the device on the wall by hanging the device's keyholes on the screw heads.

Questions and Answers:

Need help?

Do you have a question about the AudioCodes MP-112 and is the answer not in the manual?

AudioCodes MP-112 Specifications

General