Wireless Connection
Step 1: Turn on the A5+ Wireless power switch located on the rear panel. A5+ Wireless will automatically go into
“pair mode” and the Pair button on the rear panel should be flashing.
Step 2: On your device, turn on Bluetooth and go to Bluetooth preferences. Select “Audioengine A5+” to pair and
connect. The Pair indicator on the A5+ Wireless rear panel should be solid.
Step 3: Play your music and adjust volume levels on A5+ Wireless and your device.
Step 4: Repeat Steps 2 and 3 to add additional devices. A5+ Wrireless can connet only to one device at a time but
will remember up to six devices.
To disconnect A5+ Wireless from a paired device and put the speakers back into pair mode, press and hold the Pair
button on the A5+ Wireless rear panel until the pair indicator starts flashing.
Wired Connection
Step 1: Connect one of the included audio cables to your music player (phone, tablet, computer, TV, etc) and the
other end to an input on the A5+ Wireless rear panel.
Step 2: Play your music and adjust the volume on the speakers and your device to the desired listening levels.
A5+ WIRELESS SETUP VIDEO
A5+ Wireless Troubleshooting Tips
The following troubleshooting tips can help diagnose and correct most concerns with the A5+ Wireless. We have
attempted to make this list as comprehensive as possible, so some of these may not apply to your issue, but please
go through each tip.
If the power indicator on the front panel is not illuminated, then try these tips:
https://manuals.plus/wp-content/uploads/2021/05/A5wireless_How_To.mp4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
