Need help?Do you have a question about the Audiolab 8000AP and is the answer not in the manual?
Audio Specifications| A/D converters | 24Bit / 48kHz |
|---|---|
| D/A converters | 24Bit / 192kHz |
| THD+N (CODEC) | -100 dB |
Frequency Response| Frequency Response (General) | 10Hz - 20KHz (+0.2dB), 5Hz - 75KHz (+3dB) |
|---|---|
| Frequency Response (Digital Inputs) | 10Hz - 20KHz (+0.2dB), 5Hz - 24KHz (+3dB) |
| Frequency Response (5.1 Analogue Bypass) | 10Hz - 20KHz (+0.2dB), 5Hz - 100KHz (+3dB) |
Power| Mains voltage | 230VAC +/- 10% |
|---|---|
| Power consumption | 15W |
| Standby power consumption | < 7W |
Weight and Dimensions| Width | 445 mm |
|---|---|
| Height | 74 mm |
| Depth | 338 mm |
General safety warnings regarding electrical shock, cleaning, ventilation, and installation procedures.
Information on mains voltage, fuse replacement, and safe connection of the power plug, including UK specific notes.
Details connections for standard analogue, 5.1 analogue, coaxial digital, and optical digital inputs.
Initial steps for setting up the 8000AP, including powering on and navigating the on-screen display menu.
Guide to configuring loudspeaker sizes (Large/Small) and bass cut-off frequencies in the setup menu.
Procedure for setting loudspeaker distances to ensure accurate timing and soundstage.
Instructions for calibrating speaker levels using a sound level meter or by ear for balanced output.
Configuring audio processing modes like Dolby Pro Logic II and DTS Neo:6 for different audio sources.
Setting 5.1 bypass levels and configuring HDMI input mapping for audio and video sources.
Adjusting advanced options like Bass Manager, DAC Filter, Upsampling, and performing a system reset.
Technical specifications for digital inputs, analogue outputs, analogue inputs, and video outputs.
General specifications including power, weight, dimensions, and key technical features like DSP and connectivity.
To Next Page
