Need help?Do you have a question about the Audiolab 8300A and is the answer not in the manual?
General| Built-in display | Yes |
|---|---|
| Line inputs (RCA) | 1 |
| Line outputs (RCA) | 2 |
| Speakers connectivity type | Binding post |
| Damping factor | 100 |
| Output impedance | 120 Ω |
| Input sensitivity | 840 mV |
| Signal-to-Noise Ratio (SNR) | 107 dB |
| Total Harmonic Distortion (THD) | 0.002 % |
| Purpose | - |
| Product color | Silver |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 330.3 mm |
|---|---|
| Width | 444 mm |
| Height | 80 mm |
| Weight | 7800 g |
Warning about electrical shock hazard and not opening the enclosure.
General safety guidelines for operation, placement, and maintenance.
Information on mains voltage compatibility, fuse types, and replacement.
Description of the primary controls located on the front panel of the 8300A.
Overview of all input, output, power, and trigger connectors on the rear panel.
Explains how to use the remote handset, including button functions and operational range.
Details how to connect various signal sources using balanced and unbalanced inputs.
Describes the pre-amplifier outputs for connecting to external power amplifiers or sub-woofers.
Instructions for connecting the 8300A to the AC mains power supply.
Steps for powering the 8300A on and off, including standby mode procedures.
Explains the amplifier's protection circuitry for over-current and over-temperature faults.
To Next Page
