Need help?Do you have a question about the Audiolab 8000S and is the answer not in the manual?
General| Power Output | 60W per channel into 8Ω |
|---|---|
| Type | Integrated Amplifier |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | Less than 0.05% |
| Dimensions | 445 x 74 x 335 mm |
| Input Impedance | 47k Ohms |
| Damping Factor | >100 (8Ω) |
Essential safety guidelines for handling the unit and its components during servicing.
Procedures to prevent damage from electrostatic discharge (ESD) to electronic components.
Step-by-step instructions for verifying the amplifier's functionality and voltage checks.
Detailed procedures for measuring amplifier performance metrics like distortion and SNR.
Diagram and identification of critical test points on the circuit board for measurements.
An overview schematic showing the interconnections between major circuit blocks.
Detailed schematic for the left channel's line amplification stage.
Detailed specifications including power output, input sensitivity, and frequency response.
To Next Page
