Audiolab 8000S - Technical Data; 8000 S Technical Specifications

32
9.0 technical data
60 W per channel into rated load impedance (8 Ω)
95 W into 4 Ω and 130 W into 2 Ω for short periods
72 W per channel into rated load impedance (8 Ω)
115 W into 4 Ω and 150 W into 2 Ω for short periods
20 kΩ nominal
175 mV rms (relative to 0.5 V rms preamplifier output)
9 dB at 1 kHz
greater than 80 dB
(relative to 0.5 V rms preamplifier output)
100 Ω nominal
greater than 7.76 V rms
1 kΩ nominal
0 dB (i.e. the record output level is the same as the input level)
47 kΩ nominal
782 mV rms (for full rated output)
29.0 dB at 1 kHz
greater than 80 dB (relative to 0 dBW)
1 Hz – 65 kHz
rated output power
(both channels driven)
typical output power
(both channels driven)
preamplifier input
impedance
preamplifier input level
preamplifier gain
preamplifier signal
to noise
power amplifier gain
record output impedance
record output gain
power amplifier
input impedance
power amplifier
input level
preamplifier maximum
output
preamplifier output
impedance
power amplifier
signal to noise
frequency response
(-3dB)
9.1 8000S Technical specifications