Need help?Do you have a question about the AudioSource AMP 100 and is the answer not in the manual?
General| Amplifier class | A/B |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 2.0 channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 1 % |
| RMS power output per channel (4 Ohm) | 60 W |
| RMS power output per channel (8 Ohm) | 50 W |
| Bridge-mode power output per channel (8 Ohm) | 160 W |
| Line inputs (RCA) | 2 |
| Line outputs (RCA) | 1 |
| Speakers connectivity type | Binding post |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Multi-Zone capability | Yes |
| Connectivity technology | Wired |
| AC input voltage | 117 V |
| AC input frequency | 60 Hz |
| Power consumption (typical) | 500 W |
| Package weight | 4900 g |
Weight and Dimensions| Depth | 242 mm |
|---|---|
| Width | 419 mm |
| Height | 74 mm |
| Weight | 4400 g |
To Next Page
