-11-
REMOTE CONTROL OPERATION
1. ANGLE
2. FUNCTION
3. SETUP
4. REPEAT
5. TITLE
6. PREVIOUS ( )/UP
Press to navigate in an up direction
when a menu is displayed on the
screen.
7. FAST REWIND ( )/LEFT
Press to navigate in a left direction
when a menu is displayed on the
screen.
Press to switch the viewing angles.
This function only works with
discs encoded with multiple camera
angles.
Press to switch between the 16:9 and
4:3 aspect ratios.
Press to enter/exit the Setup Menu.
Press to switch the repeat modes.
For VCD2.0 discs, this function is
invalid when the PBC function is
activated.
Press to return to the title menu of a
DVD disc.
Press to skip to the previous
chapter/track.
Press repeatedly for fast reverse
playback. The available speeds are 2X,
4X, 8X, 16X, and 32X.
Note:
Note:
BATTERY INSTALLATION
Remove the battery compartment cover according to the
diagram on the right.
1: Press the ridged area to the left.
2: At the same time, pull the battery tray out.
3: Place a CR2025 lithium battery on the tray with
the positive side facing upward.
4: Replace the cover.
Note: Do not expose the battery to excessive heat.
Remote Control
REMOTE CONTROL FUNCTIONS
3
4
5
6
7
1
2
FUNCTION
To Next Page
Loading...
Need help?
General
