Audiovox MINI - DIP Switch Settings for BMW;Mini

8
The following DIP switch settings are used to congure the MediaBridge module to interface with
the various vehicle radios. Before installation, set the DIP switches to the position shown for the
corresponding radios.
DIP switch settings for BMW/Mini
Car conguration switches
For single line (Non-
Navigation) radios in Mini,
3-Series, Z3, Z4, and X3
models.
BMW
Business CD Radio
BMW & MINI
16:9 Navigation Radio
BMW 4:3
Navigation Radio
BMW MID Radio
For 16:9 (wide screen)
Navigation radio system
in BMW and Mini.
For 4:3 (small screen)
Navigation radio system
in BMW.
For single line (Non-
Navigation) radios in
5-Series, 7-Series, and
X5 models.
OFF
OFF
ON
OFF
ON ON
OFF
ON
Radio specic text eld conguration should be performed during installation. Please refer to
interface setting (DISC 5) section on page 19.
OMA-MBR-1500-BMW-012012_rev012012.indd 8 1/23/2012 9:32:32 PM