To Next PageTo Next Page
Need help?Do you have a question about the auer HTi70 6 and is the answer not in the manual?
General| Model | HTi70 6 |
|---|---|
| Heating Capacity | 7.0 kW |
| Cooling Capacity | 6.0 kW |
| Power Input Cooling | 1.6 kW |
| Refrigerant | R32 |
Manual must be safeguarded for future reference and used as evidence in case of litigation.
Key symbols indicating warnings, important recommendations, and specific precautions for handling and maintenance.
List of abbreviations and acronyms used throughout the manual for clarity and consistency.
Verification of received elements, checking for transport damage before installation procedures begin.
Admissible storage temperatures and guidelines for transporting the appliance safely and correctly.
Explanation of the heat pump's closed system, energy transfer process, and operating temperature range.
List of components delivered with the Heat Pump, such as communication cables and hydraulic fittings.
Optional accessories for purchase, including longer cables, defrost kits, and hydraulic kits.
Overview of the typical installation setup for the Heat pump and Pilot, including electrical and hydraulic connections.
Guidelines for selecting an appropriate outdoor installation site, including accepted and prohibited locations.
Instructions for properly mounting the heat pump on a stable base and managing condensate drainage.
Details on connecting the heat pump to the heating system, including pipe sizing and filter installation.
Recommendations and regulations for safely connecting the heat pump to the electrical power supply.
Initial checks after operation, advice on water circuit sealing, and condensate drainage.
Procedures for inspecting the water circuit, cleaning filters, and checking for leaks or blockages.
Recommendations for cleaning evaporator fins and general care for the heat pump unit.
Guidelines for checking electrical connections, ensuring safety, and cleaning components.
Information on how to access and read the appliance's operational meters via the pilot display.
Data charts for various sensors (water, air, compressor) showing resistance values at different temperatures.
Prohibition of modifications, procedures for decommissioning, and guidelines for recycling and disposal.
Details on the warranty period, coverage for parts and labour, and conditions for validity.
Exclusions from warranty due to misuse, improper maintenance, installation errors, or external factors.
Key technical data including maximum temperature, refrigerant type, electrical supply, and dimensions.
Performance data (heat output, COP) at various exterior temperatures and water regimes.
Procedure for cleaning the heating circuit to remove debris before heat pump installation.
Guidelines for filling the heating circuit with untreated water and warnings about warranty invalidation.
Recommendations for treating central heating installations to prevent corrosion and limescale.
Detailed dimensional drawings and measurements for the HTi70 6 kW heat pump unit.
Detailed dimensional drawings and measurements for the HTi70 8 kW heat pump unit.
Technical data sheet for the HTi70 6 kW heat pump, including energy efficiency and performance metrics.
Technical data sheet for the HTi70 8 kW heat pump, including energy efficiency and performance metrics.
