auer HTi70 6 - A5 - Dimensions; A5.1 - HTi70 6 kW Heat Pump Dimensions

- MANUAL HTi
70
6 & 8 KW HEAT PUMPS -
20
A5 - Dimensions
A5.1 - HTi
70
6 kW Heat pump
1 - Heat pump outlet
2 - Heat pump inlet
3 - Communication bus
4 - Electrical supply
- Protect the installation against corrosion with a corrosion
inhibitor, example: SENTINEL X100. Or against corrosion
and freezing with an inhibitor with an anti-freeze
additive. Example : SENTINEL X500 or SENTINEL R600.
• For existing installations:
- Desludge the installation with a desludging product to
eliminate any sludge from the installation. Example :
SENTINEL X400 ou SENTINEL X800.
- Throughly rinse the installation until the water runs clear,
with no traces of impurities left.
- Protect the installation against corrosion with a corrosion
inhibitor, example: SENTINEL X100. Or against corrosion
and freezing with an inhibitor with an anti-freeze
additive. Example : SENTINEL X500 or SENTINEL R600.
Corrosion inhibitor :
- protects against the formation of limescale
- prevents «pinhole» type corrosion
- prevents, in new installations, the formation of sludge
and the proliferation of bacteria
(in low temperature networks: algae)
- prevents the formation of hydrogen
- eliminates the sound of the generators
Treatment products from other manufacturers can be used if they
guarantee that the product is appropriate for all the materials
used in the appliance and off ers effi cient resistance to corrosion.
To fi nd this information refer to their user manual.