To Next PageTo Next Page
Need help?Do you have a question about the auer HRC70 17 and is the answer not in the manual?
Guidelines for safe and compliant electrical installation.
Best practices for hydraulic circuit preparation and connection.
Safety and general instructions for installing the HRC70 Heat Pump.
Recommendations for choosing an appropriate outdoor location for the Heat Pump.
Specific minimum distances and site restrictions for Heat Pump installation.
General advice on pipe sizing and insulation for optimal fluid circulation.
Mandatory requirements for underfloor heating circuit installations.
Using the Pilot for DHW production and related precautions.
Connecting the Heat Pump to the Pilot using the communication bus.
General recommendations for power supply connection and cable sizing.
Specific wiring for connecting the Pilot to the power supply.
How to connect the Pilot for 230V single-phase power.
Wiring instructions for connecting the Pilot to 400V three-phase power.
Electrical installation recommendations for connecting the Heat Pump.
Details on electrical protection devices for the compressors.
Wiring diagram for 230V single-phase Heat Pump connection.
Wiring diagram for 400V three-phase Heat Pump connection.
How to access and navigate the installer menu.
Choosing the appropriate back-up system for the installation.
Setting up the parameters for heating circuit 1.
Setting up the parameters for heating circuit 2.
Accessing and adjusting installer parameter settings.
Adjusting heating curve parameters for different modes.
Maintenance tasks related to the hydraulic circuit.
Maintenance advice for the HRC70 Heat Pump unit.
Maintenance for electrical connections and components.
Troubleshooting common issues without specific error codes.
Identifying and resolving compressor start-up issues.
A comprehensive list of error messages and their solutions.
How the system behaves and what to do during specific error conditions.
General warranty terms and conditions for the appliance.
Measures for frost protection in various installation scenarios.
Overview of programming heating modes for different circuits and days.
Step-by-step guide to creating custom heating programmes.
Importance of protecting heating circuits from corrosion and scale.
Using monopropylene glycol for frost protection.
Performance table for the 17kW HRC70 Heat Pump.
Performance table for the 20kW HRC70 Heat Pump.
Performance table for the 25kW HRC70 Heat Pump.
Internal wiring diagram for the 17kW single-phase Heat Pump.
Internal wiring diagram for the 17kW three-phase Heat Pump.
Internal wiring diagram for the 20kW three-phase Heat Pump.
Internal wiring diagram for the 25kW three-phase Heat Pump.
Electrical schematic diagram for the HRC70 Pilot.
Detailed internal wiring diagram for the HRC70 Pilot.
General
