AUMA Aumatic AC 01.1 Operation Instructions

3
Actuator controls AUMATIC AC 01.1 / ACExC 01.1
Operation instructions Profibus DP
Page
12. Description of actuator functions 42
12.1 Operation commands for OPEN / CLOSE operation 42
12.2 Positioner 42
12.3 Stepping mode 42
13. Safety function 43
14. Release function of the local controls (option) 44
15. Additional control inputs (option) 45
16. Combination fieldbus / standard interface (option) 47
17. EMERGENCY STOP function (option) 48
18. Redundant bus connection with component redundancy (option) 50
18.1 Settings for the redundant Profibus interface 2 (component redundancy) 50
18.2 External change-over of the communication channels 50
18.2.1 Details of the change-over 51
19. Indication and programming of the AUMATIC 51
19.1 Software parameters of the Profibus DP interface 51
19.1.1 Menu indications 51
20. Description Profibus DP interface 55
20.1 Assignment of the customer inputs of the Profibus DP interface (option) 56
20.2 Assignment of the Profibus DP connection 56
21. Trouble shooting and corrective actions 57
21.1 Optical signals during operation 57
21.2 Status indications in the display 57
21.3 Profibus DP diagnosis indication in the display 58
21.4 Actuator can not be controlled by Profibus DP 59
21.5 Measuring of the Profibus signals with an oscilloscope 62
22. Appendix A GSD file 63
23. Appendix B standard wiring diagram 64
23.1 Legend for standard wiring diagram 65
24. Appendix C Proposed wiring diagrams 66
25. Appendix D Literature references 69
26. Appendix E Connection of the screen for AUMATIC ACExC 01.1 69
27. PNO certificate 70
Index 71
Addresses of AUMA offices and representatives 72

AUMA Aumatic AC 01.1 Specifications

General

Brand	AUMA
Model	Aumatic AC 01.1
Category	Control Unit
Language	English