AUMA SQ 05.2-F07 User Manual

Control
→ Parallel
Profibus DP
Modbus
Foundation Fieldbus
Part-turn actuators
SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2
Control unit: electronic (MWG)
with actuator controls
AUMATIC AC 01.2 Non-Intrusive
Assembly, operation, commissioningOperation instructions

AUMA SQ 05.2-F07 Specifications

General

Size	SQ 05.2
Flange	F07
Type of actuator	Part-turn actuator
Voltage	24V DC / 110-240V AC
Protection class	IP67
Communication interfaces	Profibus DP
Mounting	Direct mounting to valve
Type	Electric actuator
Ambient temperature range	-25 °C to +70 °C (-13 °F to +158 °F)

Summary

Safety Instructions

Basic Information on Safety

General safety guidelines, personnel qualifications, and operational precautions.

Warnings and Notes

Explanation of warning symbols and their meanings for safe operation.

Assembly Procedures

Mounting Actuator to Valve

Instructions and precautions for mounting the actuator to the valve.

Electrical Connection

Basic Connection Information

Essential information and warnings regarding electrical connections.

Wiring with Plug/Socket Connector

Operation

Manual and Motor Operation

Procedures for manual and motor operation, including local control.

Menu Navigation and User Levels

Commissioning (Basic Settings)

Setting End Stops

Procedures for setting CLOSED and OPEN end stops for the actuator.

Torque and Limit Switching

Test Run and Checks

Corrective Action and Faults

Faults During Commissioning

Fault Indications and Warnings

Fuses and Motor Protection

Servicing and Maintenance

Preventive Measures

Technical Data

Actuator Features and Functions

Details on standard and optional features of the actuator.

Actuator Controls Features

Specifications and functions of the actuator control unit.