66
EN
SLEEP SETTING
This function allows you to program the unit to turn to standby mode by
itself after a set period of time.
1. To activate the sleep function, press the SLEEP button repeatedly. The
time will change in the below sequence on every press:
2. When your desired sleep time appears in the display, stop pressing the
button and the sleep function will be activated in two seconds. “ ” will
show on the display. Also the time remaining until switch o is displayed
next to the symbol in the display.
3. When the sleep timer counts down to zero, the unit will turn to standby
mode. To turn the sleep function o while the sleep timer is still counting
down, press the SLEEP button repeatedly to select “SLEEP OFF”. “ ” will
disappear from the display.
4. Press the SLEEP button once to show the sleep timer status on the
display when it is turned on.
Alternatively:
1. Press the MENU button on the remote control to display the function
main menu. Press the PRESET
∧/∨ buttons to select Main menu, and
then press the SELECT button to conrm.
2. Press the PRESET ∧/∨ buttons to select Sleep mode, and then press the
SELECT button to conrm.
3. Press the PRESET ∧/∨ buttons to select sleep timer, and then press the
SELECT button to conrm.
120minsSleep OFF 15MINS 30MINS 45MINS 60MINS 90mins
To Next Page
Loading...