48
EN
SYSTEM SETTINGS
Press the MENU button to display the menu, press the PRESET ∧/∨ buttons
to select System settings and then press the SELECT button to conrm.
Equalizer
This system supports a variety of equalizers and sound eects.
Press the EQ button to access the Equaliser menu
Alternatively:
During System settings mode, press the PRESET
∧/∨ buttons to select
Equaliser and then press the SELECT button to conrm.
1. The display will show : FLAT > CLASSIC > ROCK > POP > JAZZ
2. Press the PRESET
∧/∨ buttons to select and then press the SELECT
button to conrm.
Network
1. During System Settings mode, press the PRESET
∧/∨, buttons to select
Network and press the SELECT button to conrm.
2. Press the PRESET ∧/∨ buttons to select from the following settings, and
then press the SELECT button to conrm.
Network wizard
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual cong – select wireless network
with DHCP enable/disable.
PBC Wlan setup
Select PBC on the unit and press the PBC
button on the modem device that you
wish to connect with. Press the ENTER
button to continue.
View settings Display the setting on the unit.
Wlan region Select a country of your choice.
Manual settings
Select wireless network with DHCP enable/
disable.
NetRemote PIN Setup
Allows you to dene a PIN number to be
entered before being able to connect the
device remotely over a network.
Network prole View the connected network..
Keep network connected
Allows you to dene whether the device
remains connected to its network in Standby
mode and when not in Network radio mode.