Auping K2 77 - Structure of the Mesh Base; Handset; Technical Specifications

GB3
1.1 Structure of the mesh base
1. Electrically adjustable foot end
2. Electrically adjustable back section
3. Manually adjustable head support
(type 79 only)
4. Handset
1.2 Handset
1. Raise back section
2. Lower back section
3. Raise foot end
4. Lower foot end
5. Raise back section and foot end
6. Lower back section and foot end
Electromat/Electromat with head
support
Type 77/79
fig. 1
fig. 2
1.3 Technical specifications
Motor
- Safety switch: Input 230 V~
(depending on country and model
input 22/240/110 V~) 50-60
Hz/140 W. The plug of the motor is
provided with a safety switch. This
switches the main voltage to the
motor only after one of the operating
buttons on the remote control has
been pushed.
- Motors (2 in single housing):
DC motor 24 V, 65 W. maximum
continuous operating time 2 minutes
per 20 minutes.
Handset
- Coiled flexible cable 24 V.
- Push buttons to adjust the foot and
back section positions of the mesh
base.
Weight (example)
- K2 type 77, dimensions 90 x 200:
33 KG
- K2 type 79, dimensions 90 x 200:
35 KG