Aura INDIGO-879DSP - Page 12

11
X-Over
3/4-LPF FRQ - cutoff frequency: THROUGH (off)/20 Hz - 12.5 kHz.
3/4-LPF TYPE - filter type.
3/4-LPF SLOPE - slope: 6 - 48 dB per octave.
GAIN - level 3/4 channels, from -8 dB to 0 dB.3/4
3/4 e PHASE - lectrical phase switching:0° / 180°
5/6 Channel - setting high-pass filter (HPF), low-pass filter (LPF), filter type,
slope, level and phase of 5/6 channels.
5/6-HPF FRQ - cutoff frequency: THROUGH (off)/20 Hz - 12.5 kHz.
5/6-HPF TYPE - filter type.
5/6-HPF SLOPE - slope: 6 - 48 dB per octave.
5/6-LPF FRQ - cutoff frequency: THROUGH (off)/20 Hz - 12.5 kHz.
5/6-LPF TYPE - filter type.
5/6-LPF SLOPE - slope: 6 - 48 dB per octave.
5/6 GAIN - level 5/6 channels, from -8 dB to 0 dB.
5/6 PHASE - Electrical phase switching:0° / 180°
7/8 Channel - setting high-pass filter (HPF), low-pass filter (LPF), slope,
level and phase of 7/8 channels.
7/8-HPF FRQ - cutoff frequency: 10 Hz - 100 Hz / THROUGH (off)
7/8-HPF TYPE - filter type.
7/8-HPF SLOPE - slope: 6 -48 dB per octave.
7/8-LPF FRQ - cutoff frequency: 30 Hz - 800 Hz / THROUGH (off)
7/8-LPF TYPE - filter type.
7/8-LPF SLOPE - slope: 6 -48 dB per octave.
7/8 GAIN - level 7/8 channels, from -8 dB to 0 dB.
7/8 PHASE - electrical phase switching:0° /180°
X’over reset
Resetting Crossover Settings.