15
Range selection
Press the (19)) BAND button to select the broadcast bandradio stations:
FM1, FM2, FM3 (VHF), AM1, AM2.
Automatic search for radio stations
Press the button (7) or (5) to quickly search for stations.
Storing and recalling radio stations
Press and hold one of the number buttons (1-6) to memorize the current radio station.
Press one of the number buttons (1-6) to recall the current radio station.
It is possible to store 6 radio stations in each broadcast band.
Radio
SYSTEM
Factory reset
Reset / return to factory settings.
Animation - animation on display
Enabling and setting the delay interval before playing the animation on the device
display: no / 15 / 30 sec. / 1 / 2 / 4 min.
Demo mode
Enable / disable demo mode.
Car ACC - ignition lock type
Yes - set for the car with ACC position, the red power wire of the device is connected
to the ACC position of the ignition switch.
No - set for the machine without the ACC position, the red power wire is connected
to constant +12 volts.
The BT module and USB connector will be disabled when the device is turned off.
Version
Viewing the current software version (firmware).
Beep - button sound
Enable / disable sound when buttons are pressed.
AUX IN
Enable/disable AUX source.
SWC
Programming regular steering wheel buttons.
Detailed description of the programming procedure on page 18.
Overheat
Overheat protection: 90 / 100 / 110.
0 0 0
To Next Page
Loading...
