EasyManua.ls Logo

AUSA CH 200 - Maintenance Chart

AUSA CH 200
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
CH 200 / CH 250
Recommended quality S
pecifications
Change frequency
REPSOL CEPSA MOBIL SHELL TOTAL BP API CE/SF
SUPER MULTIGRADO SUPER RIMULA TOTAL RUBIA MULTIGRADE
MIL-L2104C
Oil: First after 50 h. next every 250 h. (CH 200)
TURBO DIESEL DIESEL 15W/40 15W/40 20W/40 API CD-CE
Oil filter: First after 50 h. next every 500 h. (CH 200)
DIESEL 20W/40 15W/40 CF 4 Oil and
oil filter: First after 50 h.
15W/40 20W40
next every 150 h.
(CH 250)
Fuel filter: Change every 500 h.
(CH 200) and 450h (CH 250)
Fuel
Pre-filter: Check every 150 h. Change every 300h. (CH 250)
Air filter (ext. element):
Clean every 100h. Change every 600h.
Air filter (int. element):
Clean every 200h. Change every 1000h.
CARTAGO TRANS. MOBIL UBE SPIRAX HD TOTAL HYPOGEAR API GL5 First after 50 h
90 EP 90 EP 80W/90HD 80W/90 TRANSM. EP90 MIL-L-2105B Next every 1000 h.
SAE 80W/90
TRANSELF BLS SAE 90 API GL5 First after 50 h.
MIL-L-2105D Next every 500 h.
TELEX HM DTE-46 TELLUS TOTAL ENERGOL
ISO 6743/4 HM
Oil and cardtrige: First after 50 h.
OIL 46 OIL 46 HPL 46 DIN 51524 Next every 1000 h.
SAE 40 MP PREMIUM DTE-BB MORLINA TOTAL VANELLUS API SB Grease every 50 h.
40 AX OIL 100 C-3 SAE-40
MULTIPURPOSE ARGA MOBIL GREASE
RETINAX TOTAL ENERGRASE
LITHIC GREASE
Grease every 50 h.
2 LITIO-2 SPECIAL AM MUTIS-2 LS-2
Consistency NLG12
Without dismantling the chains, clean them a clean gas-oil mixture by
Grease chains every 50h.
brushing vigorously with a hard nylon brush. Dry with compressed air.
with a brush impregnated with SAE 90 oil.
SAE 10W or liquid ATF serie A sufix A Change fluid every 1000 h.
First after 50 h.
MOBIL DTE-26 Next everty 1000 h.
Liquid with 30% of glycol and 70% of water of 0 F (standard machine). Change coolant every 6 months.
Liquid with 50% of glycol and 50% of water of -30 F a -45 F (according of the external temperature).
Flush circuit every 1000h. (CH 200)
Flush circuit every 2 years (CH 250)
ASTM D-975-77 - Grades Nº 1-D and 2-D
*VG 46 - ENVIRONMENT TEMPERATURES USUALLY INFERIOR 10ºC VG 68 - ENVIRONMENT TEMPERATURES USUALLY BETWEEN 10ºC Y 40ºC VG 100 - ENVIRONMENT TEMPERATURES USUALLY FROM 40ºC
- Do not allow the fuel tank to become empty. Refill every day.
- Check engine and hydraulic oil levels every day. Change oil and filters at frequency recommended below.
- Check radiator daily and add coolant if necesary.
- Quality oil is essential for good performance.
Descriptions
Engine
Differential
and reduction box
on axles
reduction box (x2)
COMPEN x4
Hydraulic circuit*
Articulations
Greasing points
and mast guides
Mast chains
Brakes and
inching circuit
Service and
parking brake
Cooling system
Diesel carburant
Maintenance chart

Other manuals for AUSA CH 200

Related product manuals