AUTEC AIRTR08LM User Manual

Working frequency (radio modules AIRTR08LM and AIRRT32NM)
STARTFUNCT.
1
2
3
4
R
G
STOP
S1 S2
S3
Working frequency (radio modules AIRTR08LM and AIRRT32NM)
Information provided in this manual is used for the installation of the radio remote con-
trol on the machine and for its maintenance.
Information provided in this manual allows to disable, enable and set some radio remote
control's functions that may have impacts on the risk assessment related to the ma-
chine; this assessment must be carried out to decide whether the machine can be radio
remote controlled.
Information provided in this manual cannot be used and performed by people who are
not competent, responsible for and authorized to do that.
The person in charge for the machinery's safety must keep information contained in this
manual reserved.
Those who use this information must also have been trained about the radio remote
control and its risks by Autec's personnell or by people authorized by Autec.
Autec cannot be held liable for responsibilities resulting from the modification of these
functionalities after the product sale.
IMPORTANT INFORMATION
AIR SERIES

AUTEC AIRTR08LM Specifications

General

Brand	AUTEC
Model	AIRTR08LM
Category	Control Unit
Language	English

Summary

Important Information and Safety

Air Series Radio Remote Controls

Working Frequency Overview

Introduction to setting the radio remote control's working frequency.

General Instructions and Symbols

Symbol Conventions

Explains symbols used for warnings and important information.

Mode of Service Control (MSC) Configuration

MSC Description and Purpose

Explains the Mode of Service Control (MSC) for installation and menu access.

Enabling/Disabling MSC via Receiving Unit

Step-by-step guide to enable or disable MSC using the receiving unit.

Enabling/Disabling MSC via Transmitting Unit

Step-by-step guide to enable or disable MSC using the transmitting unit.

Working Frequency Configuration

Programming Parameters

Details on BANK GROUP, RADIO MODE, and CHANNEL BANK programming.

Frequency Band Selection

Details on selecting frequency bands using DIP 1 on transmitting and receiving units.

Frequency Use Mode

Configures automatic scan (AUTO) or manual frequency selection (MANUAL).

BANK GROUP Programming

Procedure to set the frequency bank used by the radio remote control.

RADIO MODE Programming

Procedure to choose automatic scan or manual frequency selection.

CHANNEL BANK Programming

Procedure to choose the working frequency channel bank.

Frequency Table