AUTEC ARM Instruction Manual For The Use And The Maintenance

LIUDY2004_eng-00AUTEC
15
3.2 IC conformity
A Dynamic series' Radio Remote Control working in the 915-928MHz frequency band, whose
Units are li󰘵ed in the following table, complies with the requirements of the 󰘵andards IC (Indu󰘵ry
Canada) RSS-247.
Unit IC
ADD Receiving Unit Model ADD Type NE022 9061A-ADDNE022
ARM Receiving Unit Model ARM Type NC022 9061A-ARMNC022
ARM Receiving Unit Model ARM Type NB022 9061A-ARMNB022
ARS Receiving Unit Model ARS Type ND022 9061A-ARSND022
ARX Receiving Unit Model ARX Type NG022 9061A-ARXNG022
CRS Receiving Unit Model CRS Type NA022 9061A-CRSNA022
CRX Receiving Unit Model CRX Type NH022 9061A-CRXNH022
FJB Transmitting Unit Model FJB Type NZ422 9061A-FJBNZ422
FJC Transmitting Unit Model J2F Type NZ322 9061A-J2FNZ322
FJL Transmitting Unit Model FJL Type NF022 9061A-FJLNF022
FJM Transmitting Unit Model FJM Type NF022 9061A-FJMNF022
FJM Transmitting Unit Model FJM Type NZ422 9061A-FJMNZ422
FJN Transmitting Unit Model J2F Type NZ322 9061A-J2FNZ322
FJQ Transmitting Unit Model J2F Type NZ322 9061A-J2FNZ322
FJQ Transmitting Unit Model J2F Type NZ222 9061A-J2FNZ222
FJR Transmitting Unit Model FJR Type NF022 9061A-FJRNF022
FJR Transmitting Unit Model FJR Type NZ422 9061A-FJRNZ422
FJS Transmitting Unit Model FJS Type NF022 9061A-FJSNF022
Place the antenna of the Receiving Unit in a position that ensures a minimum
separation di󰄋ance of 20cm from all the people that can be in the working
area.
Read carefully the section of the Manual where the antenna position is
described, both in the general part and in the specific part referring to the
Receiving Unit.

AUTEC ARM Specifications

General

Brand	AUTEC
Model	ARM
Category	Remote Control
Language	English