4 MBC825A (80-250V ) and MBC825A (110V ) battery chargers
The MBC825A (80-250V ) and MBC825A (110V ) battery chargers are used to charge the
MBM06MH rechargeable battery used in Autec Radio Remote Controls.
A
B
C
E
A Power supply cable
B Contacts
C CHARGE LED
D POWER LED
E Technical data plate
4.1 Technical data
Power supply (MBC825A (80-250V )) ........................................... 80-250V (50/60 Hz)
Power supply (MBC825A (110V )) ........................................................... 110V (60 Hz)
Power consumption ...................................................................................................... 7W
Output voltage ............................................................................................................... 9V
Output current ........................................................................................................ 450mA
Power supply protection fuse ................................................................................ T250mA
Max. recharge time ................................................................................ see paragraph 3.1
Recharge temperature ........................................................................... see paragraph 3.1
Protection degree
....................................................................................................... IP40
Dimensions ................................................................ 100x134x57mm (3.94x5.27x2.24In)
4.2 Plates
Technical, identication and approval data of the MBC825A (80-250V ) and MBC825A (110V
) battery chargers are provided in the plate on the front of the device, where the signalling
LEDs are. You may also nd another plate with approval data in the battery housing.
These plates must not be:
- removed from their position (removal voids the guarantee)
- altered or damaged (contact Autec for replacement)
18
LIUMBS001_eng-02
MBC825A (80-250V) and MBC825A (110V) battery chargers
AUTEC -
To Next Page
Loading...
