4.6 Instructions for use
4.6.1 Light signals
The status of the battery charger is indicated by the green POWER LED and by the yellow
CHARGE LED.
The POWER LED (green) … Meaning
…is o. The battery charger is not powered.
… is on with steady light. The battery charger is powered.
The CHARGE LED (yellow) ... Meaning
…is o. The battery is fully charged or is not inserted.
... blinking (when inserting the
battery).
The battery is completely discharged.
… on with steady light. The battery is being recharged.
4.6.2 Recharge procedure
Follow this procedure to recharge batteries.
1
Connect the battery charger to the AC mains
socket (the POWER LED turns on with steady
light)
22
LIUMBS001_eng-02
MBC825A (80-250V) and MBC825A (110V) battery chargers
AUTEC -
To Next Page
Loading...
