27
1. Navigation Bar
2. Main Section
3. Functional Buttons
Navigation Bar
1. List Tab – displays the scanned data in list format.
2. Tree Tab – displays the scanned data in system distribution diagram
format.
3. Progress Bar – indicates the test progress.
Main Section
A. List Tab
Column 1 - displays the system numbers.
Column 2 - displays the scanned systems.
Column 3 - displays the diagnostic indicators describing test results:
These indicators are defined as follows:
-!-: Indicates that the scanned system may not support the code
reading function, or there is a communication error between the tester
and the control system.
-?-: Indicates that the vehicle control system has been detected, but
the tester cannot accurately locate it.
Fault | #: Indicates there is/are detected fault code(s) present; “#”
indicates the number of the detected faults.
Pass | No Fault: Indicates the system has passed the scanning
process and no fault has been detected.
B. Tree Tab
The tree tab screen displays a system distribution diagram of the vehicle
control modules. The scanned system which has passed scanning with
no fault is shown in blue font; whereas the scanned system that has been
To Next Page
Loading...
