11
Important: Use the supplied stylus or plastic-tipped pens for touch screen
display. Do not use pencil, pen or any sharp object on touch screen
display.
13. Memory Card
The Memory Card contains the tool’s diagnostic software, applications and maximum
of 4 Gigabytes storage.
Note: Do not remove the memory card while the unit is in service.
14. DLC Cables
The DLC (Data Link Connector) Cable is used to connect between the scan tool and
vehicle’s DLC. Numbers of cables are provided; select the appropriate one for the
vehicle being tested. An optional extension cable may also be used.
15. AC Power Supply
The AC power supply and power cord (12V and 3.33A) is used to power the scan tool
from wall socket.
To Next Page
Loading...
