21
Chapter 11 on page…
9 On-Board Mon. Test
The on – Board Monitor Test is useful after servicing or after erasing a vehicle’s
control module memory. The On- Board Monitor Test for non- CAN- equipped
vehicles retrieves and displays test results for emission- related powertrain
components and systems that are not continuously monitored. The On- Board
Monitor Test for CAN- equipped vehicles retrieves and displays test results for
emission-related powertrain components and systems that are and are not
continuously monitored. Test and component IDs are determined by the vehicle
manufacturer. For details, refer to Chapter 12 on page… details.
9 Vehicle Info
The Vehicle Info. enables retrieval of Vehicle Identification No. (VIN), Calibration
ID Nos. (CINs), Calibration Verification Nos. (CVNs) and In-use Performance
Tracking on 2000 and newer vehicles that support Mode. To see the details, refer
to Chapter 13 on page …
9 DTC Lookup
DTC Lookup function is used to search definitions of. DTC stored in built-in DTC
library. To search the DTC by the Lookup function, refer to Chapter 14 on
page …
9 Playback
The Playback function is used for reviewing saved data files. The data files are
saved to the MaxiDAS’s memory card with the data stream saving function, DTC
saving function, freeze frame saving function and the automated testing and
diagnostic system. The Playback function also allows you delete recorded data
files and allows you copy saved data files to and from a portable USB driver for
either temporary or permanent storage. To see the details, refer to Chapter 15
on page …
To Next Page
Loading...
