……………Pick Trigger Mode…… …….
1/2
► Manual Trigger
DTC Trigger ?
42
z If data from previously tested vehicle is not erased, data from
current test will be stored in temporary cache. Following
screen shows when Manual Trigger is selected:
……………Manual Trigger………… …...
Ready to record!
Press [ENTER] to
start recording…
Press [ESC] to exit
Or following screen shows when DTC Trigger is selected:
………………….DTC Trigger……………..
Waiting for DTC to
trigger recording…
Press [ESC] to exit
12) Use UP/DOWN scroll button to select a memory location and
press ENTER button.
http://www.obd2be.com/
To Next Page
Loading...
