Autel Maxiscan MS509 - Page 55

54
3) From On-Board Mon. Test menu, use UP/DOWN scroll button
to select a test to view and press ENTER button.
z If the vehicle under test does not support the mode, an
advisory message will be displayed on the screen.
z For CAN-equipped vehicles, test selections can be as below:
On-Board Mon. Test
1/3
On-Board Mon. Test
Reading PID…
- Please Wait -
►Test $01 Data
Test $05 Data ?
Test $09 Data
On-Board Mon. Test
The selected mode is
not supported
Press any key to con.
http://www.obd2be.com/